Entropy
is a chemistry word for disorder. An increase in entropy is
spontaneous. By looking for four things in a reaction, students can
determine whether a reaction is spontaneous or nonspontaneous by looking
for an increase in entropy.
Exothermic reactions are spontaneous and show an increase in entropy.
Gases are messier than solids, so a reaction that forms a gas shows an increase in entropy.
More
molecules show an increase in entropy. Count the coefficients on either
side of a balanced equation. If the products have more molecules then
there is an increase in entropy and the reaction could be spontaneous.
A decrease in the size of molecules (count atoms making up the molecule) is an increase in entropy.
Students
look for all four things and decide whether the overall reaction would
lead to an increase in entropy and be spontaneous.
Monday, October 17, 2016
Friday, October 14, 2016
Physical vs. Chemical
We talked about the Law of Conservation of mass and how matter cannot be created or destroyed. If you burn a log, the mass of all the ashes, smoke, gases, and everything that is burned off and left behind EQUALS the mass of the original log.
Today students discussed physical vs. chemical properties and changes. They've heard all of this before I am sure, but it doesn't hurt to go over it again. Then we did a challenge to see if they really knew their stuff.
Need to practice identifying chemical and physical properties? Check this out!
Need help identifying types of matter and whether they are heterogeneous or homogeneous? Check this out!
Here's a helpful video lecture --> HERE
Thursday, October 13, 2016
Le Chatlier - shifting equilbrium to reduce stress
Students learned about reaction rates and how to increase them. They
also learned about reversible reactions and how Le Chatlier's principle
influences shifts of equilibrium in reversible reactions.
Basically as you apply a stress to a system, the system will shift in response to the stress. If you add one of the molecules it will shift away from that molecule. If you take away a molecule, it will shift towards it to make more. Heat works the same way.
Pressure is the tricky one. If pressure is applied to an equilibrium, then the reaction will shift to the side that has the least amount of molecules (count the coefficients).
Basically as you apply a stress to a system, the system will shift in response to the stress. If you add one of the molecules it will shift away from that molecule. If you take away a molecule, it will shift towards it to make more. Heat works the same way.
Pressure is the tricky one. If pressure is applied to an equilibrium, then the reaction will shift to the side that has the least amount of molecules (count the coefficients).
Wednesday, October 12, 2016
Reaction Rate Basics
Reaction
Rates are affected by a few things. Without telling them the point, the
students had a quick demo where they had to dissolve sugar cubes the
fastest. The things that speed up reactions are:
- Temperature - warmer is faster
- Surface Area - small pieces have more surface area
- Concentration - the more water, the faster sugar will dissolve
- Catalyst - lowers the activation energy and speeds up the reaction
- Agitation - shaking or stirring increases the frequency of collisions
Tuesday, October 11, 2016
Reaction Types
We
started by talking about the simple definition of the terms, what the
probably products and reactants are and went over a basic formula for
the reaction types the students need to be familiar with.
Reaction Types include:
Can you guess what type this is?
Reaction Types include:
- synthesis
- decomposition
- singe replacement
- double replacement
- combustion
- endothermic
- exothermic
- oxidation-reduction
- neutralization
- nuclear
Can you guess what type this is?
Friday, October 7, 2016
Balancing Reactions
Students
are learning to balance equations. Today they learned that reactants
are what you start with and are on the left side of the equation.
Products are on the right side of the arrow and are what is made by
process of a chemical change.
Because of the Law of Conservation of Mass, the number of atoms have to be equal on both sides. To balance an equation, the coefficients are changed. Coefficients are the big numbers in front that tell you how many molecules there are. The subscripts (the little lower numbers) are not allowed to be changed because those are there to make neutrally bonded molecules (what we learned in the last unit.
By changing the coefficients and counting the number of atoms on both sides of the arrow, balancing can be achieved.
Because of the Law of Conservation of Mass, the number of atoms have to be equal on both sides. To balance an equation, the coefficients are changed. Coefficients are the big numbers in front that tell you how many molecules there are. The subscripts (the little lower numbers) are not allowed to be changed because those are there to make neutrally bonded molecules (what we learned in the last unit.
By changing the coefficients and counting the number of atoms on both sides of the arrow, balancing can be achieved.
Friday, September 30, 2016
Formula Writing
Today we discussed how to write chemical formulas, and what the numbers associated with a chemical formula mean.
Coefficients are the big numbers in front and are distributed to the whole molecule (which means you may have to multiply). Coefficients tell you how many molecules are present.
3He = He He He :)
Subscripts are the little lower numbers and they indicate the number of atoms and only apply to the atom it is to the right of. Subscripts tell you how many of each atom are present. Students wrote their name as a chemical compound and thought it looked pretty interesting. Some students have long formulas, other short.
We then led into counting atoms for real chemical formulas using subscripts and coefficients.
Be careful....
Coefficients are the big numbers in front and are distributed to the whole molecule (which means you may have to multiply). Coefficients tell you how many molecules are present.
3He = He He He :)
Subscripts are the little lower numbers and they indicate the number of atoms and only apply to the atom it is to the right of. Subscripts tell you how many of each atom are present. Students wrote their name as a chemical compound and thought it looked pretty interesting. Some students have long formulas, other short.
We then led into counting atoms for real chemical formulas using subscripts and coefficients.
Be careful....
Thursday, September 29, 2016
Flame Lab
The original image is HERE.
These images are originally from Compound Interest. They can be found at: Sparklers, Fireworks, and Metal Ions.
This TedEd video relates all of this the Chemistry Dudes like DeBroglie!
Want more? Check out these two videos from ScienceFriday about "The Science of Fireworks" and "Celebrating Explosive Chemistry."
Wednesday, September 28, 2016
Polar Vs NonPolar Covalent Bonds
Anyone
who has ever had to share something with someone else knows that
sometimes isn't exactly even. Covalent molecules or bonds are no
different.
If
a molecules is nonpolar covalent, it is sharing its electrons equally.
The best example of this is in diatomic molecules. Diatomic molecules
are two of the same atom bonded together - so they would have exactly
the same pull. Symmetrical molecules are also nonpolar.
Polar
covalent bonds occur when electrons are not equally shared. One atom,
usually more electronegative, has a stronger pull on the electrons and
shares them unequally. The other atom that is less electronegative has a
smaller hold on the electrons and is thus can be slightly positive.
One way to remember this is... "Polar Bears do not share... equally."
Tuesday, September 27, 2016
VSEPR
Valence Shell Electron Repulsion Theory
Electrons do not like each other and when looking at molecular structures - electrons and unshared electrons (the two dots paired together) will space out evenly so they are as far apart as possible.
Most of the names of the shapes of hints like tri, tetra, planar, etc. Students need to memorize these shapes and be able to visualize them for given formulas.
For help with VSEPR - read this.
Electrons do not like each other and when looking at molecular structures - electrons and unshared electrons (the two dots paired together) will space out evenly so they are as far apart as possible.
Most of the names of the shapes of hints like tri, tetra, planar, etc. Students need to memorize these shapes and be able to visualize them for given formulas.
For help with VSEPR - read this.
Friday, September 23, 2016
Covalent Bonding
If it is a - and -, the bond is covalent. The electrons are shared in the bond. To get the formula, you have to draw the Lewis Dot structures for the elements and connect the dots that don't have friends. You write the formula based on your drawing. To name it, use prefixes to indicate the number of atoms in the formula and the second one ends in -ide. For these it doesn't matter which element comes first.
There are 4 atoms that commonly form diatomic molecules with a covalent bond... and hydrogen is one of them! That weird atom!
Ionic Bonding
Students
learned about ionic bonding. Ionic bonding happens between metals and
nonmetals (positives and negatives). The electrons are given and taken
in this ionic bond.
To get the formula, you criss cross the charges. To name it, you say the name of the metal, then the name of the nonmetal with an -ide ending. If it is a metal from DForP block, then you use a roman numeral to indicate the charge of the metal. Basically everyone gets a Roman numeral except S-block, Boron, and Aluminum
After learning the basics, students practice.
Ionic Bonds for Dummies
Here is a cool interactive where you can build models to simulate ionic bonding.
To get the formula, you criss cross the charges. To name it, you say the name of the metal, then the name of the nonmetal with an -ide ending. If it is a metal from DForP block, then you use a roman numeral to indicate the charge of the metal. Basically everyone gets a Roman numeral except S-block, Boron, and Aluminum
After learning the basics, students practice.
Ionic Bonds for Dummies
Here is a cool interactive where you can build models to simulate ionic bonding.
Thursday, September 22, 2016
Roman Numerals for most metals
Time
to learn about roman numerals.... Here is a handy clock if you are
unfamiliar with them. Pretty much you need to know 1-7. 1 is represented
with I, five with V and 10 with X. 4 and 6 and 7 is where it gets
tricky. 4 is 1 before 5 - so its Roman numeral is IV. 6 is one after five so its roman numeral is VI.
Students also learned how to identify the charges of metals with more than one oxidation state using Roman numerals. Metals in the D, F, and lower P get Roman numerals - basically all metals but the S block, Aluminum and Boron get roman numerals. The roman numeral tells you the charge. We have to use this system because those odd metals can actually be found in more than one form - some with 2 possible charges - some with more than four!
Wednesday, September 14, 2016
Valence Electrons
Students
learned about valence electrons. Valence electrons are the outermost
electrons and are the electrons that are used for bonding and
participate in reactions. Valence electrons are only found in the S and P
blocks. The max number of valence electrons is 8. Students practiced
counting valence electrons and drawing Lewis Dot Structures.
Students also practiced identifying which noble gas an element wanted to be like. All elements want to be like two noble gases - it is just a matter of figuring out which is closer. Elements want to be like noble gases because they have full outer electron shells, or full valences. This makes them stable and non reactive which is why noble gases are sometimes called the inert gases.
Today students learned how to use valence electrons and dot structures to determine the charge of an atom. Atoms either want to gain electrons or lose electrons to become like those noble gases they envy.
Students also practiced identifying which noble gas an element wanted to be like. All elements want to be like two noble gases - it is just a matter of figuring out which is closer. Elements want to be like noble gases because they have full outer electron shells, or full valences. This makes them stable and non reactive which is why noble gases are sometimes called the inert gases.
Today students learned how to use valence electrons and dot structures to determine the charge of an atom. Atoms either want to gain electrons or lose electrons to become like those noble gases they envy.
- Ions are atoms or molecules that have a net charge, either positive or negative. There are two kinds of ions:
- Anions are negatively charged ions because they have negative net charges. This means that there is a greater number of electrons (-) than protons (+). For example, the anion, fluoride (F 1-), has a one negative charge because it has a total of nine protons and ten electrons. Thus, the net charge for fluoride is 1 negative.
- Cations are positively charged ions because they have positive net charges. This is due to these ions having more protons (positive charges) than electrons (negative charges). For example, calcium (Ca 2+) is a cation ion with 20 protons and 18 electrons. The net charge for Calcium is 2 positive. (from here)
Tuesday, September 13, 2016
Organic Chemistry Primer
Organic Chemistry is the study of carbon chemistry! Carbon has four valence electrons and thus always likes to make four bonds.
The basics for naming organic molecules include: counting the number of carbons, looking at the number of bonds between carbons, and checking for functional groups.
Prefixes are based on the number of carbons. 1=meth, 2=eth, 3=prop, 4=but, and after that the prefixes mimic the covalent prefixes. The suffix identifies the bond type. A single is an alkane and thus the suffix is -ane. Doubles - alkene; triples - alkyne.
Click on the image to make it larger.
Compound Interest's original post can be found here.
There are many organic functional groups, but at this level of chemistry, students just need to be familiar with alcohols, aldehydes, and carboxylic acids.
Thursday, September 8, 2016
Periodic Trends
It is all about the electrons! Always!
Electro- negativity is how badly atoms want electrons. The most electronegative atoms are Fluorine, Chlorine, and Oxygen. Everyone wants to be a Noble Gas... and halogens are the closest so they are the most electronegative.
Ionization energy is how difficult it is to remove electrons. It is difficult to remove electrons from atoms that are electronegative.
Atomic radius increases as you move down the periodic table because atoms have more mass, but actually decreases from left to right because atoms are holding on to their electrons tighter (because they are more electronegative).
Shielding has to do with how protons are blocked by the electron shells - the more shells there are, the more blocking there is. So something in period 5 (with 5 shells) has more shielding than an element in period 2 with two electron shells. Sheilding is constant across the periodic table because the number of shells is constant.
Friday, September 2, 2016
Electronic Configuration
Battleship, a classic game by Milton Bradley, is a game easily adaptable to learning electronic configuration.
Electronic Configuration is an intense mathematical calculation proposed by Schrodinger & Heisenberg as a way to predict where to find an electron around the nucleus in the electron cloud model.
There are four main parts of the periodic table known as orbitals. The S block, P block, D and F orbitals. Within each block, you just count over how many spaces it is. There are seven energy levels that are loosely based on the period that an element is (the D & F blocks are exceptions to energy levels). The D block is dumb and that's why it starts with one number lower. Really they just have less energy and have the same amount of energy as the S and P block in the 3rd period. The F block are failures and that's why they are 2 lower... or they have a lot less energy.
So to identify Hydrogen you would say 1s2 because it is in the first period or first energy level, in the s block, and the first member of the first block. Carbon is a 2P2 because it is in the 2nd period, in the P block, and the 2nd one over in the P block.
Students learned the pattern of electronic configuration and how to use it. Basically its like giving directions to an element on the PT using set landmarks. It is a bit confusing, but once you get the pattern, its not too bad.
Students practiced a bit and then they played Battleship to practice some more. The Periodic Table became the game board and students hid their ships on it, then guessed hits using the electronic configuration of the atoms. I think they really got the hang of it because I did not field many questions at that point.
Electronic Configuration is an intense mathematical calculation proposed by Schrodinger & Heisenberg as a way to predict where to find an electron around the nucleus in the electron cloud model.
There are four main parts of the periodic table known as orbitals. The S block, P block, D and F orbitals. Within each block, you just count over how many spaces it is. There are seven energy levels that are loosely based on the period that an element is (the D & F blocks are exceptions to energy levels). The D block is dumb and that's why it starts with one number lower. Really they just have less energy and have the same amount of energy as the S and P block in the 3rd period. The F block are failures and that's why they are 2 lower... or they have a lot less energy.
So to identify Hydrogen you would say 1s2 because it is in the first period or first energy level, in the s block, and the first member of the first block. Carbon is a 2P2 because it is in the 2nd period, in the P block, and the 2nd one over in the P block.
Students learned the pattern of electronic configuration and how to use it. Basically its like giving directions to an element on the PT using set landmarks. It is a bit confusing, but once you get the pattern, its not too bad.
Students practiced a bit and then they played Battleship to practice some more. The Periodic Table became the game board and students hid their ships on it, then guessed hits using the electronic configuration of the atoms. I think they really got the hang of it because I did not field many questions at that point.
Thursday, September 1, 2016
Dudes! (Chemistry Scientists)
There
are several "dudes," famous chemistry folks that students need to be
familiar with. These dudes (Democritus, Dalton, JJ Thompson, Millikan,
Rutherford, Bohr, Heisenberg, De Broglie, and Planck) all did
experiments and came up with different and improved atom models. The
current model is the elctron cloud or quantum mechanical model which was
formulated by Heisenberg and De Broglie.
Heisenberg and De Broglie came up with the current electron cloud model, but we draw Bohr's planetary model the most often because it easier to count the electrons. There's a TedEd video about the progression - HERE.
Electrons are tricky because they move constantly and at high speeds. Heisenberg's Uncertainty Principle states that you cannot know both the speed and location of an electron - you can only know one - because measuring either one, changes the other. DeBroglie's wave theory helps explain why electrons sometimes act like particles and sometimes are compared to waves.
For more information about the evolution of the atomic model, check out this link. And here is a video!
Here are some Dude Quizlet Flashcards to help you out.
Heisenberg and De Broglie came up with the current electron cloud model, but we draw Bohr's planetary model the most often because it easier to count the electrons. There's a TedEd video about the progression - HERE.
Electrons are tricky because they move constantly and at high speeds. Heisenberg's Uncertainty Principle states that you cannot know both the speed and location of an electron - you can only know one - because measuring either one, changes the other. DeBroglie's wave theory helps explain why electrons sometimes act like particles and sometimes are compared to waves.
For more information about the evolution of the atomic model, check out this link. And here is a video!
Here are some Dude Quizlet Flashcards to help you out.
Expanding your Horizons - Alkali Metals
This assignment, students will watch two videos about the reactions of Alkali Metals with water (HINT - They will explode!!!)
Video 1 - Brainiac - Alkali Metals
Video 2 - Alkali Metals in water, accurate!
Video 1 - Brainiac - Alkali Metals
Video 2 - Alkali Metals in water, accurate!
Wednesday, August 31, 2016
Atoms and the PT
Atoms,
or elements, are the smallest unit of matter. They retain their
identity in chemical reactions and are combined to form compounds and
everything in the universe.
Atoms have some basic parts. Protons and Neutrons are found in the nucleus and make up the atomic mass. To find the number of neutrons, you subtract the atomic number (number of protons) from the atomic mass number (protons plus neutrons).
Electrons are so tiny that they do not influence the atomic mass. They are found orbiting the nucleus in shells or orbitals. Atoms are neutral so the number of protons equals the number of electrons.
How small is an atom? Watch this entertaining TedEd video!
Mendeleev designed the periodic table by looking at the properties of elements on cards and arranging them different ways until he got a system that worked. No one told him how to do it, he just did it until it worked. He even left spaces for elements that were discovered in his lifetime. (More info about Mendeleev) His periodic table was set up according to atomic mass number. The current table, altered slightly by Moseley, is organized by atomic number (number of protons). This is an AMAZING Video about Mendeleev and his PT!
Next we discussed regions of the periodic table, colored them, and labeled them. Periods are horizontal rows (periods go at the end of a sentence) and there are 7 periods. There are 18 groups or families (vertical columns) and a few of them have special names. This a pretty excellent diagram. This website gives a lot of helpful information.
Atoms have some basic parts. Protons and Neutrons are found in the nucleus and make up the atomic mass. To find the number of neutrons, you subtract the atomic number (number of protons) from the atomic mass number (protons plus neutrons).
Electrons are so tiny that they do not influence the atomic mass. They are found orbiting the nucleus in shells or orbitals. Atoms are neutral so the number of protons equals the number of electrons.
How small is an atom? Watch this entertaining TedEd video!
Mendeleev designed the periodic table by looking at the properties of elements on cards and arranging them different ways until he got a system that worked. No one told him how to do it, he just did it until it worked. He even left spaces for elements that were discovered in his lifetime. (More info about Mendeleev) His periodic table was set up according to atomic mass number. The current table, altered slightly by Moseley, is organized by atomic number (number of protons). This is an AMAZING Video about Mendeleev and his PT!
Next we discussed regions of the periodic table, colored them, and labeled them. Periods are horizontal rows (periods go at the end of a sentence) and there are 7 periods. There are 18 groups or families (vertical columns) and a few of them have special names. This a pretty excellent diagram. This website gives a lot of helpful information.
Thursday, August 25, 2016
Expanding your Horizons - Moles and Stinky Feet
Video 1: How big is a mole? And what is a mole? A TED-Ed
Video 2: Why Mendeleev is a genius! A TED-Ed
Video 3: Why do your feet smell... and what can you do about it?